Easy-to-Use Bar Feeder: High Spindle Speed and Full Changeover in Less Than 7 Minutes

The LNS GT 342 automatic magazine bar feeder is designed with a patented guiding system to allow higher spindle speeds for greater throughput from sliding headstock turning machines.

The compact base design provides increased rigidity, thus dampening the amount of vibration coming from the bar and improving the machine's overall performance.

The GT 342 bar feeder enables the machining of bars from 0.12" to 1.73" (3-44 mm) in diameter and can guide bars from 32" (800 mm) to 12'.6" (3810 mm) in length.

VIDEO: LNS GT 342 Bar Feeder

The toolless channel design allows for partial changeovers of under 2 minutes with full changeover times of less than 7 minutes. Once unlocked, the lower channels simply slide out while the upper channel remains the same for the entire bar diameter range.

Want more information? Click below.

LNS

Rate this article

[Easy-to-Use Bar Feeder: High Spindle Speed and Full Changeover in Less Than 7 Minutes]

Very interesting, with information I can use
Interesting, with information I may use
Interesting, but not applicable to my operation
Not interesting or inaccurate

E-mail Address (required):

Comments:

Type the number:

Copyright © 2024 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy ::m::